Category: Hard Drive Troubleshooting

You can load files, like photos and videos, on the SD card. You can install apps on the SD card. You can’t transfer the SD card between devices. The SD card can be used in addition to your device’s storage.

If you only need your card for occasional use, storing photos and files on it, then a Class 10 card or higher should be okay. However, if you’re shooting a lot of video, or plan on installing entire apps on your card, you should go for the fastest card your phone can handle.

Table of contents:

Scenarios To Recover Pictures From Corrupt Sd Card

How To Recover Pictures From Damaged SD Card?

• Method 1: Recover Pictures From Corrupt SD Card Using a Card Reader
• Method 2: Fix Corrupted Pictures On SD Card Using Command Prompt
• Method 3: Retrieve Photos From Corrupted SD Card Using Hi5 Partition Recovery Tool

Steps To Recover Pictures From Damaged SD Card

Useful Tips To Prevent Photos From Corrupted SD Cards

Conclusion

Scenarios To Recover Pictures From Corrupt Sd Card

Here are some common scenarios in which you may need to restore pictures from a corrupt SD card:

• Accidental deletion: You accidentally deleted photos from your SD card and can no longer access them.
• Corrupt file system: The file system on the SD card becomes corrupt, making it impossible to access your photos.
• Virus or malware attack: Your SD card has been infected by a virus or malware, which has damaged the file system and rendered your photos inaccessible.
• Physical damage: Your SD card or memory card has been physically damaged, which has made it impossible to access your photos.
• Improper handling: You ejected the SD card from your device without properly unmounting it, causing damage to the file system and making your photos inaccessible.
• Power failure: A power failure or sudden device shutdown occurred while the SD card was in use, leading to file system corruption and making your photos inaccessible.

How To Recover Pictures From Damaged SD Card?

Method 1: Recover Pictures From Corrupt SD Card Using a Card Reader

If you want to recover pictures from a damaged SD card using a card reader without using software, you can try the following steps:

Step 1: Connect the SD card reader to your computer using a USB cable.

Step 2: Insert the damaged SD card into the card reader.

Step 3: If your computer recognizes the card, but you cannot access the files, try using a different card reader or try connecting the card reader to a different computer.

Step 4: If your computer does not recognize the card, try cleaning the contacts on the card with a soft cloth or using a different card reader.

Step 5: Once the card is recognized, open File Explorer on your computer and navigate to the SD card.

Step 6: Try to open the folders containing the pictures. If you encounter an error message or are unable to view the pictures, try copying the entire folder to your computer’s hard drive.

Step 7: If you are unable to copy the folder or receive an error message during the copy process, try copying individual pictures instead of the entire folder.

Step 8: If you are still unable to access the pictures, you may need to seek the help of a professional data recovery service. These services have specialized tools and techniques to recover data from damaged SD cards.

Method 2: Fix Corrupted Pictures On SD Card Using Command Prompt

You can use the Command Prompt on a Windows computer to retrieve pictures from a damaged SD card. Here are the steps you can follow:

Step 1: Connect the SD card reader to your computer using a USB cable.

Step 2: Insert the damaged SD card into the card reader.

Step 3: Open the Command Prompt on your computer. To do this, click on the Start button and type “cmd” in the search box. Right-click on “Command Prompt” and select “Run as administrator”.

Step 4: In the Command Prompt, type the following command and press Enter:
chkdsk [drive letter]: /f
Replace “[drive letter]” with the drive letter assigned to the SD card.

Step 5: CHKDSK will start scanning the SD card for errors and attempt to repair them.

Step 6: Once the scanning and repair process is complete, try accessing the pictures on the SD card again.

Step 7: If you are unable to access the pictures, you can use the following command to copy the files from the SD card to your computer:
xcopy [drive letter]:*.jpg [destination folder] /s
Replace “[drive letter]” with the drive letter assigned to the SD card, and “[destination folder]” with the folder on your computer where you want to copy the pictures

Step 8: The xcopy command will copy all the JPG files from the SD card to the specified folder on your computer.

Method 3: Retrieve Photos From Corrupted SD Card Using Hi5 Partition Recovery Tool

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make recovering photos from damaged sd cards extremely easy. You can restore easily your files without any modification. The tool is built with powerful algorithms that dive deeper into the petition to recover more than 500 types of files lost due to any reason. The device is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Recover Pictures From Damaged SD Card

Step 1: The main screen will display the “Partition Recovery” option and the “Formatted / Reformatted Recovery” option.

Step 2: Select the “Partition Recovery” option if the partition is deleted, lost, or corrupted

Step 3: In case, if the partition is formatted or reformatted intentionally or unintentionally, then go with the “Formatted / Reformatted Recovery” option.

Step 4: Now, select the drive from where you want to recover partitions and go to the “Next” option to start the partition recovery process (Software will display all the available drives present in your system, including externally connected hard drives).

Step 5: Partition will be recovered in a short interval of time.

Step 6: Once the recovery process is completed, retrieved partition data will be displayed in the “Data Type” and “File Type” views

Step 7: you can check recovered partition files using the “Preview” option

Step 8: Click on the “Save” button to successfully store the recovered data

Useful Tips To Prevent Photos From Corrupted SD Cards

• Use a good-quality SD card
• Properly eject the SD card
• Avoid using the same SD card on multiple devices
• Keep the SD card clean
• Don’t fill the SD card to capacity
• Use a backup solution
• Avoid using the SD card in extreme temperatures

Conclusion:

Here we end our discussion on sd card damaged photo recovery. Where we have explained 6 ways to help you get back pictures. However, if you are looking for an easy yet quick way to recover images from a damaged sd card. We suggest you make use of the Hi5 Partition Recovery Tool. If you have any additional questions, feel free to drop them in the comment section below.

A hard drive that won’t mount can be a frustrating experience, especially if you have important data on it that you need to access. When a hard drive doesn’t mount, it means that the computer is unable to recognize or access the contents of the industry, which could be due to various reasons such as a damaged file system, corrupted partition table, or physical damage to the industry itself.

Fortunately, there are ways to recover data from a hard drive that won’t mount. In this process, you may try different methods such as connecting the drive to a different computer, using different cables, or utilizing data recovery software. However, if none of these methods work, you may need to seek professional data recovery services that use more advanced techniques to recover your data.

Why My Hard Drive Won’t Mount?

If your hard drive is not mounting or being recognized by your computer, several factors could be causing this issue. Here are some possible reasons and troubleshooting steps to help you diagnose the problem:

• Connection issues: Ensure that the cables connecting your hard drive to your computer are properly plugged in. Try using a different cable or port to rule out any connection problems.
• Power issues: Make sure your hard drive is receiving adequate power. If it’s an external hard drive, check if it has a separate power adapter and ensure it is properly connected and functioning. If it’s a portable hard drive, try connecting it to a different USB port or using a powered USB hub.
• Drive format or partition issues: If the hard drive is new or has been formatted in a file system that your operating system doesn’t recognize, it may not automatically mount. In such cases, you may need to format the drive or create a compatible partition using disk management tools.
• Drive letter conflicts (Windows): Sometimes, a conflict with existing drive letters can prevent a hard drive from mounting. To resolve this, you can assign a new drive letter to the hard drive using the Disk Management tool in Windows.
• File system errors: File system errors or corruption on the hard drive can prevent it from mounting. You can run disk repair tools like CHKDSK (Windows) or Disk Utility (Mac) to scan and repair any errors.
• Compatibility issues: Ensure that the hard drive is compatible with your operating system. Some older hard drives may require specific drivers or firmware updates to work with newer operating systems.
• Hardware failure: If none of the above steps resolve the issue, there is a possibility of a hardware failure within the hard drive. In such cases, it may require professional assistance or data recovery services to retrieve the data or repair the drive.

How To Recover Data From Hard Drive That Won t Mount

Method 1: Recover Data From External Hard Drive That Won t Mount By Booting into Safe Mode

Booting into Safe Mode is one method to recover data from a hard drive that won’t mount. Here’s how to do it:

Step 1: Restart the computer and repeatedly press the F8 key until the Advanced Boot Options menu appears.

Step 2: Select Safe Mode and press Enter.

Step 3: Once the computer has booted into Safe Mode, open File Explorer and check if the hard drive that won’t mount is visible. If it is, try to copy the data from the hard drive to a different location, such as an external hard drive or a USB drive.

Step 4: If the hard drive is still not visible, try checking the Disk Management tool. To do this, right-click on the Start button and select Disk Management. Look for the hard drive that won’t mount and see if it appears there. If it does, try assigning a drive letter to the hard drive by right-clicking on it and selecting Change Drive Letter and Paths.

Method 2: Recover a Hard Drive That Won t Mount By the Disk Management

If your hard drive won’t mount, you can try restoring files by using Disk Management in Windows. Here are the steps:

Step 1: Right-click on the Start button and select Disk Management.

Step 2: Look for the hard drive that won’t mount in the list of drives. It should be marked as “unknown” or “unallocated”.

Step 3: Right-click on the drive and select “Initialize Disk”.

Step 4: In the Initialize Disk dialog box, select the disk you want to initialize and choose the partition style you want to use. Choose MBR if the hard drive is smaller than 2 TB, or GPT if it is larger than 2 TB. Click OK to initialize the disk.

Step 5: After initializing the disk, right-click on the unallocated space and select “New Simple Volume”. Click Next to proceed.

Step 6: Choose the volume size and assign a drive letter to the new volume. Click Next.

Step 7: Select the file system you want to use for the volume, and then click Next.

Step 8: In the Format Partition dialog box, choose the formatting options you want to use, and then click Next.

Step 9: Click Finish to complete the process.

Method 3: Recover Files From the Hard Drive That Won’t Mount By Removing the Hard Drive from the Enclosure

If your hard drive is housed in an enclosure and won’t mount, you can try removing the hard drive from the enclosure and connecting it directly to the computer using a SATA cable. Here are the steps:

Step 1: Power off your computer and unplug it from the wall.

Step 2: Open the enclosure by removing any screws or clips holding it together. This may require a screwdriver or other tools.

Step 3: Locate the hard drive inside the enclosure and remove it from its housing. You may need to detach any cables or connectors.

Step 4: Once you have the hard drive in hand, use a SATA cable to connect it directly to your computer’s motherboard. SATA cables typically have an L-shaped connector on one end and a straight connector on the other end.

Step 5: Power on your computer and check if the hard drive is recognized. If it is, you can try copying your data to another location.

It’s important to note that removing the hard drive from the enclosure may void any warranty you have on the device. Additionally, make sure to handle the hard drive with care and avoid touching any of the electronic components to avoid damage.

Method 4: Recover Data From External Hard Drive That Won t Mount Using Hi5 Partition Recovery Tool

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make retrieve data from hard drive that won t mount is extremely easy. You can restore easily your files without any modification. The device is built with powerful algorithms that dive deeper into the petition to recover more than 500 types of files lost due to any reason It supports all kinds of brands of hard drives like SanDisk, Toshiba, hp, etc. The tool is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Retrieve Files From Hard Drive That Won’t Mount

Step 1: The main screen will display the “Partition Recovery” option and the “Formatted / Reformatted Recovery” option.

Step 2: Select the “Partition Recovery” option if the partition is deleted, lost, or corrupted

Step 3: In case, if the partition is formatted or reformatted intentionally or unintentionally, then go with the “Formatted / Reformatted Recovery” option.

Step 4: Now, select the drive from where you want to recover partitions and go to the “Next” option to start the partition recovery process (Software will display all the available drives present in your system, including externally connected hard drives).

Step 5: Partition will be recovered in a short interval of time.

Step 6: Once the recovery process is completed, retrieved partition data will be displayed in the “Data Type” and “File Type” views

Step 7: you can check recovered partition files using the “Preview” option.

Step 8: Click on the “Save” button to successfully store the recovered data.

Tips To Prevent Data From Hard Drives That Won’t Mount

• Regularly back up your data
• Avoid physical damage
• Keep your computer clean
• Avoid sudden power loss
• Use reliable hardware and software
• Perform regular maintenance

Conclusion:

Here we end our discussion on retrieving files from hard drives that won’t mount. Where we have explained 6 ways to help you get files off hard drive that won t mount. However, if you are looking for an easy yet quick way to restore data from the hard drive. We suggest you make use of the Hi5 Partition Recovery Tool. If you have any additional questions regarding this article, Feel free to drop them in the comment section below.

A USB drive, also referred to as a flash drive or memory stick, is a small, portable device that plugs into the USB port on your computer. USB drives are commonly used for storage, data backup, and transferring files between devices.

USB, in full universal serial bus, technology used to connect computers with peripheral devices. USB drive is also a memory drive because it uses flash memory. 

Common uses for recovering partition USB drives are for storage, supplementary back-ups, and transferring computer files. Compared with floppy disks or CDs, they are smaller, faster, have significantly more capacity, and are more durable due to a lack of moving parts.

Causes For a Deleted Partition on a USB Drive

There are several possible reasons why a partition on a USB drive may be deleted, including:

• Accidental deletion: The most common cause of a deleted partition is accidental deletion by the user. This can happen when trying to delete a file or folder, but accidentally deleting the entire partition instead.
• Disk management errors: Mistakes made in disk management software, such as when resizing or moving partitions, can lead to unintentional partition deletion.
• Virus or malware infection: A virus or malware infection on the USB drive can cause data corruption and lead to partition deletion.
• Hardware failure: A failing USB drive or the USB port can cause data corruption, which can lead to partition deletion.
• Power failure: A sudden power failure during data transfer or while the USB drive is in use can cause data corruption and partition deletion.

How Do I Restore Deleted Partition On USB Drive?

Method 1: Restore USB Partition Using CMD

To retrieve a lost partition from a USB drive using the Command Prompt (CMD), you can follow these steps:

Step 1: Connect the USB drive to your computer.

Step 2: Open the Command Prompt by typing “cmd” in the search bar and selecting “Command Prompt” from the results.

Step 3: Type “diskpart” and press Enter to open the DiskPart utility.

Step 4: Type “list disk” and press Enter to display a list of all the disks connected to your computer.

Step 5: Identify the disk number of your USB drive from the list and type “select disk x” (where “x” is the disk number) and press Enter.

Step 6: Type “list partition” and press Enter to display a list of all the partitions on your USB drive.

Step 7: Identify the lost partition from the list and type “select partition x” (where “x” is the partition number) and press Enter.

Step 8: Type “assign letter=y” (where “y” is any unused drive letter) and press Enter to assign a drive letter to the partition.

Step 9: Type “exit” and press Enter to exit DiskPart.

Step 10: Open Windows File Explorer and navigate to the newly assigned drive letter to access the recovered partition data.

Method 2: Recover Deleted Partition Flash Drive Using Hi5 Partition Recovery Tool

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make usb partition recovery extremely easy. You can restore easily your files without any modification. The device is built with powerful algorithms that dive deeper into the petition to recover more than 500 types of files lost due to any reason It supports all kinds of brands of USB drives like SanDisk, Toshiba, hp, etc. The tool is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Retrieve Deleted Partition From USB Drive

Step 1: The main screen will display the “Partition Recovery” option and the “Formatted / Reformatted Recovery” option.

Step 2: Select the “Partition Recovery” option if the partition is deleted, lost, or corrupted

Step 3: In case, if the partition is formatted or reformatted intentionally or unintentionally, then go with the “Formatted / Reformatted Recovery” option.

Step 4: Now, select the drive from where you want to recover partitions and go to the “Next” option to start the partition recovery process (Software will display all the available drives present in your system, including externally connected hard drives).

Step 5: Partition will be recovered in a short interval of time.

Step 6: Once the recovery process is completed, retrieved partition data will be displayed in the “Data Type” and “File Type” views 

Step 7: you can check recovered partition files using the “Preview” option

Step 8: Click on the “Save” button to successfully store the recovered data

Tips To Prevent Deleted Partition From USB Drives

• Backup your data regularly
• Use reliable and updated antivirus software
• Safely remove USB drives
• Avoid abrupt removal of USB drives
• Do not modify partition settings unless necessary
• Use disk management tools carefully

Conclusion:

Here we end our discussion on recovering deleted partition flash drives. Where we have explained 6 ways to help you get back deleted partition. However, if you are looking for an easy yet quick way to restore a USB partition. We suggest you make use of the Hi5 Partition Recovery Tool. If you have any additional questions regarding this article, Feel free to drop them in the comment section below.

A hard drive is the hardware component that stores all of your digital content. Your documents, pictures, music, videos, programs, application preferences, and operating systems represent digital content stored on a hard drive. Hard drives can be external or internal.

For our pick, the Seagate Backup Plus wins the best external hard drive overall. The device is ultra portable for easy carry, and it offers a straightforward design that works with both Windows and Mac.

Overall, failure rates were low, with an average AFR of 1.01% across all drives, although smaller drives (those below 12TB) made up the majority of the issues.

Possible Scenarios in Which Data Loss From Seagate Hard Drive Recovery May Happen

There are several possible causes of data loss from Seagate hard drive recovery, including:

• Hardware failure: Hard drives have a limited lifespan, and over time, the mechanical components can fail. This can result in data loss.
• Power surges: Power surges can cause damage to the electronic components of the hard drive, resulting in data loss.
• Malware and viruses: Malware and viruses can corrupt the data on your hard drive, making it inaccessible or unreadable.
• Human error: Accidentally deleting files or formatting the wrong drive can result in data loss.
• Natural disasters: Fires, floods, and other natural disasters can damage the hard drive and cause data loss.
• Software issues: Bugs or glitches in the software used to manage the hard drive can cause data loss.

Note: It’s important to back up your data regularly to protect against any potential data loss.

How To Recover Data From Seagate Hard Drive?

Method 1: Stop Using The Hard Drive To Restore Seagate External Hard Drive

• Stop using the Seagate hard drive immediately as soon as you suspect data loss. This will help prevent any further damage or overwriting of data that may occur if the hard drive is used.
• Disconnect the Seagate hard drive from the computer or device it was connected to. If it is an external hard drive, disconnect it from the USB or other port it was connected to.
• Do not attempt to open the Seagate hard drive or repair it yourself, as this could cause further damage to the hard drive and make data recovery more difficult or impossible.
• Do not attempt to format or partition the Seagate hard drive, as this will overwrite the lost or deleted data and make it harder to recover.

Method 2: Retrieve Data From Seagate Hard Drive By Checking the Physical Damage

If you suspect physical damage to your Seagate hard drive, it’s important to check for physical damage before attempting any data recovery steps. Here are the steps to recover data from a Seagate hard drive by checking for physical damage:

• Examine the Seagate hard drive for any visible physical damage, such as cracks, dents, or scratches.
• Check the USB or other cable that connects the hard drive to your computer for any damage, such as frayed or broken wires.
• If there is visible physical damage to the hard drive or cable, do not attempt to recover the data yourself. Instead, seek the help of a professional data recovery service.
• If there is no visible physical damage, connect the Seagate hard drive to another computer or device to see if it is recognized.
• If the hard drive is not recognized, try connecting it to a different computer or device, or try using a different USB or another cable to connect it.

Method 3: Recover Deleted Files From Seagate External Hard Drive By Connecting The Drive To Another Computer

If you’re unable to access the data on your Seagate hard drive from your computer, connecting it to another computer can be a useful step in attempting to recover the lost data. Here are the steps to restore files from a Seagate hard drive by connecting it to another computer:

• Connect the Seagate hard drive to another computer using a USB or other cable.
• Make sure the Seagate hard drive is recognized by the other computer by checking File Explorer or Disk Management (on Windows) or Finder (on Mac).
• If the Seagate hard drive is recognized, attempt to access the lost data by opening the drive in File Explorer or Finder and searching for the files you need.
• If the Seagate hard drive is not recognized by the other computer, try using a different USB or another cable to connect it, or try connecting it to a different computer.
• Make sure the other computer has the same operating system as the computer on the Seagate hard drive that was originally used. For example, if the Seagate hard drive was used on a Windows computer, connect it to another Windows computer.

Note: Remember to take precautions when handling a damaged hard drive, as mishandling it can cause further damage and make data recovery more difficult.

Method 4: Retrieve Data From Seagate External Hard Drive Using Hi5 Partition Recovery Tool

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe, the device is user-friendly to make recovering deleted data from Seagate hard drive extremely easy. You can restore quickly your data without any modification. The tool is built with powerful algorithms that dive deeper into the petition to recover more than 500 types of files lost due to any reason It supports all kinds of brands of external hard drives like Samsung, SanDisk, Toshiba, portable drives, etc. The tool is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Recover Files From Seagate Hard Drive

Step 1: Open the main window and click the Partition Recovery option.

Step 2: Then select the Partition Recovery option, Suppose the Partition is deleted then the data will be lost or corrupted.

Step 3: If the partition is formatted or reformatted intentionally or unintentionally, then go with the Formatted / Reformatted Recovery option.

Step 4: Now select the drive from where you want to recover your partition/file and then click the Next button to start the Recovery process.

Step 5: Then your partition will be recovered in a very short period.

Step 6: Once your Partition recovery is completed, The retrieved data will be displayed on the Data type and File type.

Step 7: Then Preview the Partition File Recovery, While previewing you can check your recovered partition file.

Step 8: Click on the save button, Then successfully the stored data will be recovered.

Useful Tips To Prevent Data Loss on Seagate Data Recovery

• Regularly back up your important data to an external hard drive, cloud storage, or other backup solutions. This way, if your main device fails, you have a copy of your data.
• Keep your computer and antivirus software up-to-date to protect against malware and viruses that can cause data loss.
• Handle your devices and storage media carefully to avoid physical damage. Use protective cases or sleeves for laptops, tablets, and phones.
• Keep liquids, heat, and magnetic fields away from your devices and storage media. Store them in a cool, dry place and away from direct sunlight.
• Use reliable and high-quality storage media, such as solid-state drives or reputable hard drives, or external hard drive brands like Seagate, Western Digital, or Toshiba.
• Avoid opening email attachments or clicking links from unknown sources to avoid malware or viruses.
• Use a surge protector or uninterruptible power supply to protect your devices from power surges and unexpected power outages that can cause data loss.
• Use strong and unique passwords to protect against unauthorized access to your devices and data.

Conclusion:

Here we end our discussion on recovering data from Seagate hard drives such as Pendrives and USBs and many more external storage devices. Where we have explained 7 ways to help you get back your data. However, if you are looking for an easy yet quick way to restore Seagate external hard drive. We suggest you make use of the Hi5 Partition Recovery Tool. If you have any additional questions regarding this article, Feel free to drop them in the comment section below.

Losing important data from your Samsung hard drive can be a frustrating and stressful experience. Whether it’s due to accidental deletion, formatting errors, system crashes, or hardware failures, the thought of permanently losing valuable files can be daunting. However, there is hope – data recovery techniques can often help retrieve lost data from Samsung hard drives

Data recovery is the process of accessing and retrieving lost, deleted, or inaccessible data from storage devices like hard drives. Samsung hard drives, like other types of storage devices, store data on magnetic platters. When data is deleted or lost, it may not be immediately erased from the drive; instead, the space it occupied is marked as available for new data. Until that space is overwritten, there’s a chance to recover the lost files.

Table of content:

Common Scenarios That May Cause Data Loss on Samsung Hard Drive Recovery

How Do I Recover Data From My Samsung SSD Without Using Software?

• Method 1: Restore Data From Samsung Hard Drive Using Recycle Bin
• Method 2: Retrieve Data From Samsung Hard Drive Using File History
• Method 3: Restore Data From Samsung Hard Drive By Booting in Safe Mood

Retrieve Data From Samsung Hard Drive Using Software

Steps To Recover Data From Samsung Hard Drive

Helpful Tips To Prevent Data Loss

Conclusion

Common Scenarios That May Cause Data Loss on Samsung Hard Drive Recovery

Several common scenarios may cause data loss on a Samsung hard drive. Some of these scenarios include:

• Physical damage: Dropping or mishandling the hard drive can cause physical damage to the drive’s components, which can lead to data loss.
• Power surges: Sudden power surges or outages can damage the hard drive’s electronics, resulting in data corruption or loss.
• Malware or viruses: Malware or viruses can corrupt files on the hard drive or delete them entirely, leading to data loss.
• File system errors: Errors in the file system can cause the hard drive to become inaccessible or cause data corruption.
• Human error: Accidentally deleting or overwriting files, formatting the wrong drive, or other human errors can lead to data loss.
• Software or hardware failures: Issues with software or hardware components, such as a failing hard drive controller, can cause data loss.
• Natural disasters: Floods, fires, earthquakes, and other natural disasters can damage or destroy the hard drive, leading to data loss.

Note: It’s essential to take preventative measures to protect your data, such as regularly backing up important files, using surge protectors, and avoiding mishandling or dropping the hard drive. In the event of data loss, it’s best to stop using the hard drive immediately and seek professional help to avoid further damage or data loss.

How Do I Recover Data From My Samsung SSD Without Using Software?

Method 1: Restore Data From Samsung Hard Drive Using Recycle Bin

If you have accidentally deleted a file from your Samsung hard drive, you may be able to retrieve it from the Recycle Bin by following these steps:

• Double-click on the Recycle Bin icon on your desktop to open it.

• Search for the file that you want to retrieve. You can either scroll through the list of files or use the search bar at the top to search for the file by name.

• Once you’ve found the file, right-click on it and select “Restore.” This will return the file to its original location on your hard drive.

Method 2: Retrieve Data From Samsung Hard Drive Using File History

If you have File History enabled on your Windows computer, you can retrieve previous versions of a file that has been deleted or modified on your Samsung hard drive. Here are the steps to retrieve data using File History:

• First, connect the Samsung hard drive to your computer.
• Next, open the folder where the deleted or modified file was located.
• Right-click on the folder and select “Properties.”

• In the “Properties” window, select the “Previous Versions” tab.
• You should see a list of previous folder versions, including the understanding that contained the deleted or modified file. Select the version you want to restore and click “Open.“

• Once the folder opens, you can locate the deleted or modified file and copy it to another location on your computer.

Note that File History must be enabled on your Windows computer to retrieve previous versions of files. If it’s not already enabled, you can turn it on by going to the “Backup and Restore” section in the Control Panel and selecting “Set up backup.”

Method 3: Restore Data From Samsung Hard Drive By Booting in Safe Mood

If your Samsung hard drive has issues and you cannot access your data, you can retrieve it by booting your computer in Safe Mode. Here are the steps to boot your computer in Safe Mode:

• First, please turn off your computer and connect the Samsung hard drive
• Next, turn on your computer and repeatedly press the “F8” key until the Advanced Boot Options screen appears.
• Next, use the arrow keys to select “Safe Mode” or “Safe Mode with Networking” and press Enter.
• Once your computer boots up in Safe Mode, try reaccessing your data. If you can access your data, copy it to another location on your computer or an external drive.

Retrieve Data From Samsung Hard Drive Using Software

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe. The user-friendly device makes Samsung hard drive data recovery extremely easy. You can restore your data quickly without any modification. The tool is built with powerful algorithms that dive deeper into the petition to recover over 500 files lost for any reason. It supports all kinds of brands of external hard drives like Samsung, SanDisk, Toshiba, Seagate portable drives, etc. The tool is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Recover Data From Samsung Hard Drive

Step 1: Open the main window and click the Partition Recovery option.

Step 2: Select the Partition Recovery option; suppose the partition is deleted, and the data will be lost or corrupted.

Step 3: If the partition is formatted or reformatted intentionally or unintentionally, then go with the Formatted / Reformatted Recovery option.

Step 4: Select the drive from where you want to recover your partition/file, and click the Next button to start the Recovery process.

Step 5: Then your partition will be recovered in a brief period.

Step 6: Once your Partition recovery is completed, The retrieved data will be displayed on the Data and File types.

Step 7: Preview the Partition File Recovery. While previewing, you can check your recovered partition file.

Step 8: Click on the save button. Then successfully, the stored data will be recovered.

Helpful Tips To Prevent Data Loss:

• Always have your backup data.
•  Think twice before you delete files or empty Recycle Bin.
• Never write new data to the place where data loss appears.
• Use professional data recovery solutions to recover lost or deleted files.
•  Be careful while deleting the photos. Do not delete any files accidentally.
• Finally, avoid physical damage to your Disk.

Conclusion:

Here we end our discussion on recovering data from Samsung hard drives such as Pendrives, USBs, and many more external storage devices, where we have explained three ways to help you regain your data. However, if you are looking for an easy yet quick way about how to recover data from Samsung SSD, By using the Hi5 Partition Recovery Tool. If you have any additional questions, please drop them in the comment section below.

An external hard drive is a storage device that connects to a computer or other device externally, usually via a USB or Thunderbolt cable. It functions like an internal hard drive but is not integrated into the computer or device and can be easily disconnected and moved between devices.

External hard drives come in various sizes and storage capacities, from small portable drives holding a few hundred gigabytes of data to larger desktop drives storing several terabytes. They are typically used to back up important files and documents, store multimedia files such as recover deleted photos from external hard drives and videos or expand the storage capacity of a computer or device with limited built-in storage.

External hard drives may use different types of storage technology, such as traditional spinning disks or solid-state drives (SSDs), and they may be formatted in different file systems depending on the intended use and compatibility with the device or operating system.

Table of content:

Common Reasons To Find Deleted Files On External Hard Drives

How To Recover Deleted Files From External Hard Drive?

1. Method 1: Restore Files From External Hard Drive By Using Recycle Bin
2. Method 2: Recover Lost Files From External Hard Drive Using File History
3. Method 3: Recover Deleted Files From an external Hard Drive using Hi5 Partition Recovery Tool

Steps To Recover Deleted Files From Portable Hard Drive

Preventions For Deletion Of Files From External Hard Drive

Conclusion

Common Reasons To Find Deleted Files On External Hard Drives

There are several common reasons why files can be deleted or go missing on an external hard drive. Some of these include:

1. Accidental deletion: Accidental deletion is the most common reason files go missing on external hard drives. It can happen when you accidentally erase external hard drive files or folders and mistakenly format the industry, which erases all data on the drive.
2. Software errors: If there are errors or issues with the software that is managing the external hard drive, such as a file system error or a corrupt driver, it can result in files going missing or becoming inaccessible.
3. Virus or malware attacks: External hard drives can be infected with viruses or malware, which can result in files being deleted or corrupted. Some types of malware can even hide files or make them inaccessible.
4. Physical damage: If the external hard drive is physically damaged, it can result in data loss. This can happen if the drive is dropped, is exposed to extreme temperatures, or experiences a power surge.
5. File system corruption: If the file system on the external hard drive becomes corrupted, it can result in files going missing or becoming inaccessible. This can happen if the drive is not safely ejected or if there is a power failure while the drive is in use.
6. Human error: recover missing files from external hard drives due to human error, such as accidentally dragging and dropping files into the wrong folder or moving files to the trash or recycle bin without intending to delete them.

How To Recover Deleted Files From External Hard Drive?

Recovering deleted files from an external hard drive can be a daunting task, but there are several free methods you can use to recover your lost data. Here are some steps you can take to recover deleted files from an external hard drive for free:

Method 1: Restore Files From External Hard Drive By Using Recycle Bin

The first step to recovering deleted files is to check the Recycle Bin. If the file you are looking for is still in the Recycle Bin, you can easily restore it. To do this, simply open the Recycle Bin, find the file you want to restore, right-click on it, and select “Restore”.

Step 1: Open recycle bin on your pc

Step 2: Once the Recycle Bin is open, recently deleted files will appear.

Step 3: Select the files you want to recover 

Step 4: Right-click on the files you want to recover

Step 5:Click on Restore

Method 2: Recover Lost Files From External Hard Drive Using File History

To recover deleted files from an external hard drive using File History, follow these steps:

Step 1: Connect your external hard drive to your computer.

Step 2: Open the File History or Backup and Restore (Windows 7) settings on your computer. You can do this by typing “File History” or “Backup and Restore” into the search bar on the taskbar.

Step 3: Click on “Restore files from a current backup” or “Restore my files” (depending on your version of Windows).

Step 4: Select the external hard drive that contains the files you want to recover, and then click “Next.”

Step 5: Choose the files or folders you want to recover. You can either browse through the backup or use the search bar to find specific files.

Step 6: Click on “Restore” to recover the selected files to their original location.

Note that the File History feature must have been previously enabled and configured to back up your external hard drive in order to use this method. If File History was not enabled at the time of the data loss, or if the backup is incomplete, you may not be able to recover all of your deleted files using this method.

Method 3: Recover Deleted Files From an external Hard Drive using Hi5 Partition Recovery Tool

Hi5 Partition Recovery is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make data recovery software for external hard drives extremely easy. You can restore quickly your files without any modification. The tool is built with powerful algorithms that drive deeper into the petition to recover more than 280 types of files lost due to any reason. It supports all kinds of brands of external hard drives like Dell, Samsung, sandisk, Toshiba, and Seagate portable drives, etc. The tool is compatible with all versions of Windows and Mac. Download now and try it for free.

Download NowDownload Now

Steps To Recover Deleted Files From Portable Hard Drive

Step 1: The main screen will display the “Partition Recovery” option and the “Formatted / Reformatted Recovery” option.

Step 2: Select the “Partition Recovery” option if the partition is deleted, lost, or corrupted

Step 3: In case, if the partition is formatted or reformatted intentionally or unintentionally, then go with the “Formatted / Reformatted Recovery” option.

Step 4: Now, select the drive from where you want to recover partitions and go to the “Next” option to start the partition recovery process (Software will display all the available drives present in your system, including externally connected hard drives).

Step 5: Partition will be recovered in a short interval of time.

Step 6: Once the recovery process is completed, retrieved partition data will be displayed in the “Data Type” and “File Type” views 

Step 7: you can check recovered partition files using the “Preview” option

Step 8: Click on the “Save” button to successfully store the recovered data

Preventions For Deletion Of Files From External Hard Drive

To prevent the deletion of files from your external hard drive, here are some preventative measures you can take:

• Regularly back up your files: One of the most important steps you can take to prevent data loss is to regularly back up your files. You can use cloud storage, an external hard drive, or a combination of both to ensure your files are protected.
• Use anti-virus software: Use anti-virus software to protect your computer and external hard drive from virus and malware infections. Regularly update your anti-virus software to keep it current and effective.
• Handle your external hard drive carefully: Avoid dropping or mishandling your external hard drive, as this can cause physical damage to the hard drive and lead to data loss.
• Avoid power outages or surges: Use a surge protector to protect your external hard drive from power outages or surges, as these can cause data loss or corruption.
• Don’t modify or delete files you’re not sure about: Be cautious when modifying or deleting files on your external hard drive, particularly if you’re not sure what they are. If in doubt, seek professional help or advice.

Conclusion: 

Here ends our discussion on how to recover deleted files from the external hard drive we have given you the proper detailed information with simple methods for recovering files from an external hard drive. Please feel free to comment below for the best and safe recovery, Hi5 Partition Recovery Tool. If you have any queries regarding this article comment in the below section.

Frequently Asked Questions:

SFC or System File Checker if run successfully solves most Windows system files issues but what if at the end of the SFC scan you receive an error ‘Windows Resource Protection found corrupt files but was unable to fix some of them’.

If you are unsure how to go about this error, then give this article a read as you will find some helpful solutions.

What is SFC/System File Checker?

If Windows doesn’t boot normally or some Windows functions are not working properly, you may be asked to run the SFC scan. This SFC tool scans and restores corrupt system files after which most systems issues will be resolved.

Some of the advantages of SFC are that it is a built-in tool readily available, takes only a few minutes to complete scanning and is not destructive (does not damage your data). Hence, thanks to these advantages, many users find this tool very useful.

In some cases, if SFC finds corrupt system files upon scanning but cannot fix them, it will display the following error message.

‘Windows resource protection found corrupt files but was unable to fix some of them’

Solutions to fix the SFC error ‘Windows Resource Protection found corrupt files but was unable to fix’

Solution 1: Run SFC in Safe Mode

To enter Safe Mode, restart your computer and when you see the Windows logo appear, hit the F8 key

1. You will be entered into a screen with Advanced Options
2. Click Troubleshoot > Advanced Options
3. Then select Start-up Settings > Enable Safe-Mode

Once you log in through Safe Mode, type ‘cmd’ in the taskbar search and open Command Prompt (Run as Administrator). When the command prompt window opens, type the following command.

‘sfc /scannow’ and hit Enter

The SFC scan will now run in Safe Mode. If it completes successfully, Safe Mode has solved the issue and you’re done here. If you still receive the same error, proceed to the next solution.

Solution 2: Run DISM

DISM, which stands for Deployment Image Servicing and Management is a well-known tool for repairing corrupt Windows systems files. It is particularly used when SFC isn’t able to resolve issues. For instance, in case of the error ‘, Windows Resource Protection found corrupt files but was unable to fix’.

To run DISM,

1. In the taskbar search, type ‘cmd’
2. Open Command Prompt using Run As Administrator and type the following command

 ‘DISM /Online /Cleanup-Image /RestoreHealth’

Please note that DISM usually takes longer than an SFC scan as it is pretty detailed. Also, please don’t interrupt the scanning progress at any time even if you think it is taking longer than usual.

If DISM completes successfully, restart your system and run SFC scan again to check if issues have been resolved.

Solution 3: Perform a reset

If you find that the SFC error still persists after performing Safe Mode SFC and DISM, then you can perform a system reset or refresh to resolve the error.

To reset your system, please follow the instructions below.

1. Open the Start menu and select Settings
2. Click Update & Recovery > Recovery
3. Under Reset This PC without affecting your files, click Get Started

Then follow the on-screen instructions to complete the reset process.

Note: Even if you choose the option ‘Keep your files’ while resetting your PC, in some cases, you may find some files missing after the reset. So, always be sure to have a backup before you perform any of these reset or reinstall operations. If you need to recover files after a Windows reinstall, use Hi5 data recovery software as it performs complete recovery of all your data. It recovers system files, personal files of all formats like documents, images, videos, etc.

DiskPart is a tool that allows managing disks and partitions through the command line. In essence, you can clean and format drives, assign drive letters, create or delete partitions etc. It is also possible to change the read-only attribute of a storage device using this tool. (One instance where you may need to do this is when you are unable to transfer files to the storage device).

But while changing the read-only attribute using DiskPart through command prompt, many users have reported the following error.

‘DiskPart failed to clear disk attributes’.

If you are encountering this error, then read this blog to find some solutions that will help you resolve it. The reasons for this error as well as corresponding solutions are covered here.

Solution 1: Check the physical switch on the USB

Certain USB devices have a physical switch that lets you turn ON or OFF the write protection. If the switch is ON, it means that the write protection attribute is turned ON and you won’t be able to write anything on the USB.

Ideally, if this switch is turned ON, you may get the error while trying to change the read-only attribute setting through the command prompt.

In order to overcome this error, turn OFF this switch and re-insert the storage device to your system. Then try transferring data to the device. If you are unable to, then change the read-only attribute using the Diskpart command and try again.

Solution 2: RUN CHKDSK

The error may also be caused due to corruption in the file system or bad sectors on the storage device. If these errors are present in the storage device, Windows will not be able to change read-only attributes and hence produce errors. In order to overcome this problem, you can try running CHKDSK on the device.

1. Type ‘cmd’ in the taskbar search
2. Select Command Prompt and choose Run as Administrator
3. In the Command prompt, type the following command

CHKDSK X: /F (where X: is the drive letter of the storage device)

Solution 3: Format the USB drive

If your USB drive has turned RAW, then you may receive the error ‘Diskpart failed to clear disk attributes’. In that case, you will need to recover data from RAW drive and format it.

To format the USB drive,

1. Type ‘cmd’ in the taskbar search and open Command Prompt and Run as Administrator
2. When the command prompt opens, type the following commands:

• ‘list volume’ (Note down the volume # of the USB drive)
• ’select volume #’ (where # is the number associated with the USB drive, which you noted down in the previous step)
• ‘format fs=fat32’ (You can also change the file system to any of your choices)
• ‘exit ‘

Remove the storage device and connect it back again. Now, check if you can transfer files to it. If not, change the attributes through DiskPart and try again.

If none of the above methods work, it could probably be that the USB device is faulty. In that case, you may need to further examine the device or replace it in worse cases.

Recover data from corrupt or inaccessible USB devices

If the USB flash drive or any storage device (like an external or internal hard drive) is corrupt or turned inaccessible, you can recover data from them using a tool called Hi5 Software. This tool is specialized in recovering data from RAW hard drives or inaccessible hard drives. After you’ve recovered data, you can format the drive to resolve corruption issues. Once formatted, the drive is as good as new and ready to be used.

Hi5 data recovery software can not only recover data from corrupt drives, but it can also be used in numerous other scenarios. For instance, it can be used to recover data after diskpart clean, after a factory reset or even after formatting a drive.

Several Windows users encountered network adapter error “Windows is still setting up the class configuration for this device (Code 56)” after Windows update 1709 and 1803. This error also occurs when your network adopter conflicts with the installed VPN application.

The affected computer loses all its network connections and status of the network adopter in the Device Manager will be shown as “Windows is still setting up the class configuration for this device (Code 56)”.

So, based on numerous user reports, the possible resolutions for the error message “Windows is still setting up the class configuration for this device (Code 56)” are listed below.

Instructions to Fix Windows is Still Setting Up the Class Configuration for This Device (Code 56):

Step 1: Run Network Troubleshooter

Running Network troubleshooter helps in fixing most of the network driver issues including problems like conflicts with other installed apps.

• So, here is how to run Network troubleshooter.
• Open Settings and select Network and Internet.

• Click Network troubleshooter and wait till the diagnosing process gets completed.

Step 2: Reset Network

If running Network troubleshooter failed to solve the error “Windows is still setting up the class configuration for this device (Code 56)”, then try resetting the network.

• To reset network, click the Network reset link in the Network and Internet wizard.

• Next, in the confirmation window, hit Reset now option. Allow your system to reboot and complete the process.

Step 3: Remove VPN Program

Since the prime cause behind the error “Windows is still setting up the class configuration for this device (Code 56)” is installed third-party VPN software conflicting the network adopter, it is suggested to uninstall the VPN program you have running and reboot the system.

Step 4: Undo Windows Update

If you are facing the error “Windows is still setting up the class configuration for this device (Code 56)”, after updating Windows then uninstall the respective update.

• To do this, open Windows Settings wizard and click the Update & Security button.

• Choose to View update history and select Uninstall updates.

• In Installed Updates window, select the update you wish to remove and hit Uninstall button.

Step 5: Clean Install Windows

If you cannot solve the error “Windows is still setting up the class configuration for this device (Code 56)” using any of the above steps, then the last solution would be to clean install your Windows operating system.

Clean install refreshes the OS and fixes most of the errors, corruptions, virus, and many other system issues.

Caution: It is suggested to copy entire data (or at least your important files from the computer to a safe external hard drive before you start clean installing Windows. Else, you might need to perform data recovery after format and Windows reinstallation, since chances of data loss are maximum after the clean install.

Procedure to Clean Install Windows:

• Boot your computer using a bootable USB drive
• On the Windows Setup screen, click Next
• Click the Install Now button
• Enter the license key. Click I don’t have a product key option if, you are reinstalling Windows.
• Select the edition of Windows you wish to have and hit I accept the license terms to agree
• Choose Custom: Install Windows only (advanced)
• Select and delete all previous partitions
• Select the empty drive and follow the on-screen instructions

This completes the Windows installation. Now, proceed to set up your account and configurations.

Typically, F8 key in Windows keyboard is dedicated to reaching Advanced Boot menu when your Windows is loading. And, that’s from where you can enter into Safe Mode. But surprisingly, F8 key is no longer helpful in entering Safe Mode on newer versions of Windows operating system like Windows 10.

Windows 10 users might think that this functionality is removed from the F8 key. However, it is not completely true.

In fact, F8 key is still presented to open Advanced Boot options in Windows 10 systems. But, Microsoft has disabled this functionality by default with an aim to offer faster boot rates. If the user wants to have the normal F8 key functionality just like older Windows editions, then this feature has to be enabled manually.

So, in this informative blog article let’s see how to enable the normal functionality of F8 key that opens Advanced Boot Options from where you can enter Safe Mode in Windows 10.

How to Enable F8 Key for Entering Safe Mode in Windows 10?

Boot Configuration Data (BCD) edit is a Windows built-in tool available to help users when they wish to modify the default Windows startup configurations. Using this BCD edit, you can change how your operating system is set to start.

And, here are the steps to use BCD edit to enable F8 key Safe Mode feature:

• Press Windows (a button with Windows logo) and R keys at a time.
• In the Run window search box, type cmd and hit CTRL, Shift and Enter buttons.
• Type in bcdedit /set {default} bootmenupolicy legacy and click Enter.

• You will see a confirmation message “The operation completed successfully.” Now, restart the computer.

Press F8 key before Windows loads. This opens Advanced Boot Options window. Now, you can choose to enter Safe Mode.

Your F8 key normal functionality is enabled and now onwards, F8 key helps you to enter Safe Mode at startup. But, remember that this option works only when your Windows 10 is working normally.

Apart from using the F8 function key, there are various other ways to enter Safe Mode in Windows 10. And, here it is listed how you can enter Windows 10 Safe Mode at three different cases.

FYI!! Wondering how to get back permanently deleted files in Windows 10? Then, here is an ideal solution. Check the link and find an easy way to recover permanently deleted files on Windows 10 laptop or PC.

How to Enter Safe Mode in Windows 10?

1. Steps to Enter Safe Mode when Windows 10 Won’t Boot

Safe Mode loads your Windows with fewer functionalities (minimum services and software). So, when your Windows 10 computer is failing to boot, boot it in Safe Mode and find out the causes for the problem.

• Shut down your computer using the power button and power it ON again. Do this until you see Preparing Automatic Repair window. Let Windows finish Diagnosing.

• Click Advanced options.

• Choose Troubleshoot.

• Select Advanced options.

• Click the Startup Settings button.

• Restart the computer and press 4.

2. Steps to Enter Safe Mode from Windows 10 Login Menu

• At the login/signing screen, click the power button (located at the right bottom side).
• Select the Restart option.
• Next, choose Troubleshoot.
• Select the Advanced options (same as in the last method).
• Open the Startup Settings window.
• Opt to Restart the computer and press number 4.

3. Steps to Enter Safe Mode when Windows 10 is Working Normally

If your Windows 10 computer is working normally and you have to enter Safe Mode, then you can do it through System Configuration tool by following the below instructions:

• Open Run window by clicking the Windows and R key together.
• Type msconfig and click OK.
• In the System Configuration tool, select Boot.
• Under Boot options, enable Safe boot and hit OK.

• In the System Configuration confirmation window, select Restart to enter Safe Mode.

• To disable Windows 10 booting into Safe Mode, repeat the above steps and uncheck Safe boot under Boot options. Save the changes.