Category: How To

Windows 7 are the most unloved operating system Microsoft has ever released. No matter what desktop or laptop you are using. You will encounter data loss at some point or the other. At times you might accidentally delete a file or a folder, in some cases, you might shift delete a few files, and your files might also get corrupt due to virus infection, or various other scenarios. But irrespective of the reason, the end result is always the same “Data Loss”.

If you have also lost data due to any of the above-mentioned scenarios or due to any reason from your Windows 7 system and are looking out for different ways to perform data rescue on Windows 7. Then you can review this article and follow the methods carefully to recover deleted files on a Windows 7 system.

Table of contents:

Common Reasons To Recover Deleted Files From Windows 7

There are several common reasons why someone might need to restore files from Windows 7:

• Accidental deletion: Perhaps the most common reason for accidentally deleting Windows 7 important files can happen if you mistakenly delete a file, or if you accidentally format a disk or partition.
• Hard drive failure: Another reason to restore files is if your hard drive fails. This could be due to physical damage to the drive, or due to logical issues with the file system.
• Virus or malware attack: Malware can infect your computer and cause various issues, including deleting or corrupting important files. If your system has been infected, you may need to restore your files from a backup.
• System crash: A system crash can cause data loss, and restoring files may be necessary if the crash has caused any files to become corrupted or lost.
• Upgrading or reinstalling Windows: When you upgrade or reinstall Windows, you may need to restore files from a backup in order to get your data back on your system.

How To Recover Permanently Deleted Files In Windows 7 Without Software?

Here are three common ways to get back deleted files on Windows 7 without using data recovery software. Let’s check the detailed instructions.

Method 1: Retrieve Deleted Files From Windows 7 From Recycle Bin

If you have deleted a file from your Windows 7 computer and it is not yet permanently deleted, you may be able to recover it from the Recycle Bin. Here are the steps to recover deleted files from Windows 7 from the Recycle Bin:

Step 1: Double-click on the Recycle Bin icon on your desktop to open it.

Step 2: Locate the deleted file you wish to recover. You can use the search bar at the top of the Recycle Bin window to search for the file.

Step 3: Once you have found the file, right-click on it and select “Restore”. Alternatively, you can drag the file to a new location on your computer to restore it.

Step 4: The file will be restored to its original location on your computer.

Method 2: Restore Deleted Files From Windows 7 with a Backup

If you have a backup of your Windows 7 computer, you can restore deleted files from the backup. Here are the steps to restore deleted files from Windows 7 with a backup:

Step 1: Open the backup software that you used to create the backup. Many backup software programs come pre-installed with Windows 7, such as Windows Backup and Restore.

Step 2: Follow the on-screen instructions to locate and select the backup file that contains the deleted file(s) you wish to restore.

Step 3: Once you have selected the backup file, you should see a list of the files and folders that were backed up. Locate the deleted file(s) you wish to restore.

Step 4: Select the deleted file(s) you wish to restore and click on the “Restore” button.

Step 5: Follow the on-screen instructions to complete the restore process. Depending on the size of the file(s) and the speed of your computer and backup device, the restore process may take several minutes or longer.

Method 3: Recover Deleted Excel File Windows 7 From The Previous Version

If you have accidentally deleted a file on your Windows 7 computer and have not yet backed it up, you may be able to restore a previous version of the file. Here are the steps to retrieve Windows 7 deleted files from the previous version:

Step 1: Navigate to the folder where the deleted file was located.

Step 2: Right-click on the folder and select “Properties”.

Step 3: In the Properties window, select the “Previous Versions” tab.

Step 4: You will see a list of previous versions of the folder, including any versions that were created by System Restore or Windows Backup and Restore.

Step 5: Select the previous version that you want to restore and click “Open” to view its contents.

Step 6: Find the deleted file in the previous version and copy it to a new location on your computer.

How To Recover Deleted Files From Windows 7 Using Software

Method 4: Recover Shift Deleted Files From Windows 7 Using Hi5 File Recovery Tool

Hi5 File Recovery is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make data recovery software for Windows 7  extremely easy. You can restore easily your files without any modification. The device is built with powerful algorithms that dive deeper into the petition to recover more than 280 types of files lost due to any reason It supports all kinds of brands of windows. The tool is compatible with all versions of Windows and Mac.

Download NowDownload Now

Steps To Retrieve Permanently Deleted Files From Windows 7

Step 1: Download and install Hi5 File Recovery Tool on your desktop.

Step 2: Then you will get the two main windows, Deleted File Recovery option, and Lost File Recovery.

Step 3: Select the appropriate option based on the situation you are facing.

Step 4: The software will ask you to Select the drive from where you want to recover files.

Step 5: Choose the drive and click on the Next option to initiate the file Recovery process.

Step 6: Wait for a while.

Step 7: Once the data recovery process is completed, you can view recovered files using the Preview option.

Step 8: Click on the Save option to save retrieved files on any desired location

Useful Tips To Prevent Data Loss From Windows 7

• Regularly back up your data
• Install anti-virus
• Use a surge protector
• Use a surge protector
• Be careful when deleting files
• Use strong passwords

Conclusion:

Here ends our article on Recovering permanently deleted files from Windows 7 we have given you the proper detailed information about deleted files from Windows 7, If you have any doubts regarding this article, Let us know in the below comment section. Here is the best recovery software to retrieve deleted files from Windows 7 by using  Hi5 File Recovery software.

Outlook Data Files (. ost) are used when you have an Exchange account and want to work offline or use or use the default Cached Exchange Mode. This type of data file is also used for accounts that you set up with the Outlook Connector for Outlook.com (formerly Hotmail).

Users prefer using OST files for the continuation of their work in case of an unstable or no internet connection. On the other hand, PST files are commonly used to generate a backup of Outlook data. OST files are only compatible with one server, which is the Microsoft Exchange server.

Table of contents:

Reasons Why OST File Gets Corrupt?

How To Repair Damage OST File?

• Method 1: Repair Corrupt OST File Using Scanpst
• Method 2: Repair the OST File By Deleting and Recreating
• Method 3: Fix Corrupt OST File Using Hi5 OST File Repair

Steps To Fix Corrupted Outlook OST File

Useful Tips To Fix Corrupt/Damaged OST Files

Conclusion

Reasons Why OST File Gets Corrupt?

There can be various reasons why an OST (Offline Storage Table) file gets corrupt. Some of the common reasons include:

• Sudden power failure: A sudden power failure or system shutdown while working on Outlook can cause the OST file to become corrupt.
• Virus or malware attacks: A virus or malware attack on your system can damage the OST file and corrupt it.
• Improper synchronization: If there is any issue during the synchronization process between the OST file and the Exchange Server, it can lead to OST file corruption.
• Software malfunction: If there is a software malfunction while working with Outlook or if any third-party add-ins are installed in Outlook, it can lead to OST file corruption.
• Large OST file size: If the corrupt OST file size exceeds its maximum limit or if it contains too many items, it can make the file more prone to corruption.
• Hardware failure: A hardware failure such as a hard drive crash can cause the OST file to become corrupt.

How To Repair Damage OST File?

Method 1: Repair Corrupt OST File Using ScanPST

Microsoft provides a built-in tool called ScanPST (also known as the Inbox Repair Tool) that can be used to repair corrupt OST files in Outlook. Here are the steps to repair a corrupt OST file using ScanPST:

• Close Outlook and any other program that may be using the Outlook OST file.
• Locate the ScanPST.exe tool on your computer. The location of the tool may vary depending on the version of Outlook you are using. You can use the search function in Windows to find the tool.
• Double-click on the ScanPST.exe file to open it.
• In the “Enter the name of the file you want to scan” field, enter the path and name of the corrupt OST file that you want to repair. You can click on the “Browse” button to locate the file if you are not sure of the location.
• Click on the “Start” button to begin the scanning process.
• The tool will analyze the OST file and report any errors that it finds. Click on the “Repair” button to start the repair process.
• Once the repair process is complete, the tool will show a summary of the repairs that were made. Click on the “OK” button to close the tool.
• Open Outlook and check if the OST file has been repaired successfully.

Method 2: Repair the OST File By Deleting and Recreating

If your OST (Offline Storage Table) file is corrupt and you don’t have a backup or don’t want to use a third-party tool to repair it, you can try deleting and recreating the OST file. Here are the steps to delete and recreate an OST file:

• Close Outlook and any other program that may be using the OST file.
• Open the Control Panel and go to “Mail”.
• Click on “Show Profiles” and select the profile that is associated with the corrupt OST file.
• Click on “Properties” and then click on “Email Accounts”.
• In the “Email” tab, select the account that is associated with the OST file and click on “Change”.
• Click on “More Settings” and go to the “Advanced” tab.
• Click on “Offline Folder File Settings” and then click on “Disable Offline Use”.
• Click on “Yes” to confirm that you want to disable offline use.
• Close all the windows and go back to the “Mail” window.
• Click on “Data Files” and select the OST file that you want to delete.
• Click on “Remove” and confirm that you want to delete the file.
• Close all the windows and open Outlook.
• Go to “File” > “Account Settings” > “Account Settings”.
• Click on the “Data Files” tab and click on “Add”.
• Select “Outlook Data File (.ost)” and click on “OK”.
• Give the new OST file a name and save it in a desired location.
• Once the new OST file is created, you can re-enable offline use by going to “File” > “Account Settings” > “Account Settings”, selecting the account, clicking on “Change”, going to “More Settings” > “Advanced”, and then clicking on “Offline Folder File Settings” and selecting the new OST file.
• Click on “OK” to save the changes.

Method 3: Fix Corrupt OST File Using Hi5 OST File Repair

Hi5 OST File Repair is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make repairing corrupted ost files extremely easy. You can repair easily your files without any modification. The tool is built with powerful algorithms that dive deeper into the petition to fix more than 500 types of files lost due to any reason. It supports all kinds of OST files like calendars, contacts, emails, etc. The tool is compatible with all versions of Windows and Mac.

Download Now

Steps To Fix Corrupted Outlook OST File

Step 1: Download and Install Hi5 Outlook PST File Repair Software on your Window System

Step 2: The main screen will display three main options

• Open Default PST File – Select the default location of your PST File
• Select PST File Manually – If you’re aware of the Outlook PST File location, then choose this option and provide the PST file path manually
• Find All PST Files – Select this option when you are not aware of the PST file path. It scans the entire drive to fetch the PST files present in your hard drive

Step 3: Now you can see two different scanning options on this screen

• Normal Scan – You can select this option when the severity of PST file corruption is low
• Smart Scan – In case, if you’ve deleted emails, contacts, appointments, journals, notes, or any other Outlook attributes or if the severity of PST file corruption is high when Normal Scan fails to scan

Step 4: After selecting the appropriate options, click on the “Repair” button to start repairing corrupted or damaged Outlook PST files

Step 5: When the repair process is completed, you can view repaired and recovered Outlook PST File by using the “Preview” option

Step 6: Now just import the repaired PST file and access the healthy and error-free Outlook PST file

Useful Tips To Fix Corrupt/Damaged OST Files

• Use a reliable antivirus program
• Avoid force-closing Outlook
• Use the latest version of Outlook
• Keep the OST file size under control
• Avoid sudden shutdowns
• Use the built-in ScanPST tool
• Create regular backups

Conclusion: 

Here we end our discussion on repairing ost files from Outlook. Where we have explained 6 ways to help you get back damaged ost files. However, if you are looking for an easy yet quick way to fix corrupted ost files. We suggest you make use of the Hi5 OST File Repair Tool If you have any additional questions, feel free to drop them in the comment section below.

MOV is a video format that Apple developed. It’s a MPEG 4 video container file that is primarily used with Apple’s QuickTime program. A MOV repair can hold many different video formats and multimedia — audio, video, and text — in the same file on different tracks.

A MOV file is an Apple QuickTime Movie file. Open one with iTunes, VLC, Google Drive, and other media players. Convert to video formats like MP4 with FileZigZag or another video converter tool.

Why Does My MOV File Gets Corrupt?

There can be several reasons why a MOV file may become corrupt. Some common causes are:

• Incomplete file transfer: If the MOV file is not transferred properly, it may become corrupt. This can happen if the transfer is interrupted or if the file is not downloaded completely.
• Malware or virus: Malware or virus can infect the MOV file, causing it to become corrupt. This can happen if the file is downloaded from an untrusted source or if the system is infected with a virus.
• Improper shutdown: If the system shuts down improperly while the MOV file is open or being written to, it may become corrupt.
• Hardware issues: Issues with the hard drive or other storage media can cause the MOV file to become corrupt.
• Codec issues: If the codec used to encode or decode the MOV file is not compatible with the media player, it may cause the file to become corrupt.
• Software issues: Bugs or issues with the media player or software used to create the MOV file can also cause the file to become corrupt.

Symptoms Of Corrupted MOV File

Some common symptoms of a corrupt MOV file that needs repair include:

• The video is not playing or is playing with glitches, freezes, or skips.
• Audio is out of sync or there is no sound at all.
• The video file is not opening or is opening with an error message.
• The video file size is smaller than the expected size.
• The video file is partially damaged, and some parts of it are missing or corrupted.
• The video file is crashing the media player or causing other software issues.
• The video quality is poor or distorted.

How To Fix Corrupted MOV Files Without Using Software?

Method 1: Fix Corrupted MOV File By Renaming Files

• Right-click on the corrupt MOV file and select “Rename” or click on the file once to highlight it and press the “F2” key.

• Change the file extension from “.mov” to “.mp4” or vice versa. For example, if the file extension is “.mov”, rename it to “.mp4”.

• Press “Enter” to save the changes.
• Open the renamed file in a media player and check if the video plays properly.

Method 2: Fix the Damaged MOV File Using Different Media Player

If a MOV file is corrupt and won’t play properly in one media player, you can try using a different media player to see if it can play the file without any issues. Here are the steps to repair a corrupt MOV file by using a different media player:

• Download and install a different media player on your computer. Some popular options include VLC Media Player, QuickTime, or Windows Media Player.
• Right-click on the corrupt MOV file and select “Open With” or drag and drop the file onto the icon of the media player you want to use.

• Wait for the media player to open and attempt to play the MOV file.
• If the video plays without any issues, the problem may have been with the original media player, and you can continue using the new media player to play the file.
• If the video still won’t play properly, the issue may be due to more severe corruption or damage to the file.

Method 3: Repair Damaged Mov File By Updating Codecs

If a MOV file is corrupt and won’t play properly due to a missing or outdated codec, you can try updating the codec to fix the issue. Here are the steps to repair a corrupt MOV file by updating codecs:

• Identify the codec required to play the MOV file. You can use a media player like VLC to get information about the codec used by the file. Open the media player and click on “Tools” > “Codec Information” to view the codec details.
• Search for the required codec online and download the latest version from a trusted source.
• Install the new codec on your computer and restart the media player.
• Open the corrupt MOV file in the media player and check if it plays properly.
• If the video still won’t play properly, the issue may be due to more severe corruption or damage to the file.

Note: It’s important to note that updating the codec may not always work, especially if the file is severely corrupt or damaged. In such cases, you may need to use a reliable MOV file repair tool to fix the issue.

Method 4: Repair Damaged MOV Files Using a Video Converter

Using a video converter to convert the corrupt MOV file to a different format can sometimes help repair the file. Here are the steps to repair a corrupt MOV file using a video converter:

• Download and install a reliable video converter on your computer. Some popular options include HandBrake, Any Video Converter, or Freemake Video Converter.
• Open the video converter and select the option to “Add Files” or drag and drop the corrupt MOV file into the converter window.
• Select the output format to which you want to convert the file. It’s recommended to choose a common video format like MP4, AVI, or MKV.
• Configure the conversion settings as required, such as video resolution, bitrate, or audio quality.
• Click on the “Convert” button to start the conversion process. Wait for the converter to finish converting the file.
• Once the conversion is complete, try playing the newly converted file in a media player and check if it plays properly.

How To Fix Broken MOV File Using Software?

Hi5 MOV File Repair is an award-winning tool loved by millions of users across the globe, the tool is user-friendly to make fix corrupted mov files extremely easy. You can repair easily your files without any modification. The device is built with powerful algorithms that dive deeper into the petition to repair more than 500 types of files lost due to any reason It supports all kinds of brands of MOV files that repair. The tool is compatible with all versions of Windows and Mac.

Download Now

Steps To Fix Broken MOV Files

Step 1:  Download Hi5 MOV File Repair Software on your computer

Step 2: Complete the installation procedure and launch the tool

Step 3: Provide a healthy (working) MOV file using the Healthy File option

Step 4: Now choose your corrupted or unplayable MOV/MP4 file via Corrupted File key

Step 5: Start the repair course by clicking on the Repair button

Step 6: The software starts the scanning and repairing process

Step 7: Once the fix action gets completed you can view the fixed MOV/MP4 video using the Preview option

Step 8: Save the repaired video file in any desired place (except the source location) on your system by clicking on the Save button

Useful Tips To Repair MOV File:

• Backup your files regularly: Create a backup of your important video files regularly to prevent the loss of valuable data in case the file gets corrupted.
• Use reliable storage media: Use high-quality storage media for storing your video files. Avoid using cheap or unreliable storage devices, as they are more prone to data corruption and damage.
• Avoid abrupt removal of storage devices: Always eject storage devices properly before unplugging them from your computer. Abrupt removal can cause data corruption and damage to the file system.
• Use reliable software: Use reliable software to record, edit, and play your video files. Avoid using software from unknown or untrusted sources, as they may contain malware or viruses that can corrupt your files.
• Keep your system up-to-date: Keep your operating system and software up-to-date to avoid compatibility issues and bugs that can cause data corruption.

Conclusion:

Here ends our article on how to fix corrupted MOV files, In this article, we have given you detailed proper information on repair mov files such as damaged, corrupted, lost, etc, However, Here is our effective tool to repair corrupt MOV files called Hi5 MOV File Repair, If you have any additional questions regarding this article feel free to drop them in the comment section below.

If your computer has malfunctioned or if any recent update you made to the computer is not favorable, then it is possible to undo this change and restore your system to an earlier point in time using a built-in tool called ‘System Restore’. This tool has the ability to undo any recent changes to your system thus helping you resolve issues that you may be experiencing.

System Restore is readily available by typing the term in the task bar’s Search feature. But in some instances like when your system has experienced a crash, a blue screen error or when it fails to boot normally, you may not be able to access System Restore the usual way. In that case, you can perform a system restore using the command prompt instead and you will see how in this blog post.

How to perform a system restore using just Command Prompt in Windows 10?

1. Restart your computer and when the Windows logo appears, press the F8 key. You may need to press this key multiple times in order to enter the blue screen with the advanced options menu
2. In the ‘Choose an Option’ screen, click Troubleshoot > Advanced Options
3. In the Advanced Options screen, select Start-up Settings
4. Click Restart to be entered into a screen where you can select how Windows should be booted
5. In this screen, select Safe Mode with Command Prompt
6. Then login to your computer in the same way as you normally would be entered into the command prompt screen
7. In the command prompt, type the following commands and hit Enter after each of them

‘cd restore’

‘rstrui.exe’

8. In the System Restore window that opens, click Next to begin the process
9. In the next screen, choose an appropriate restore point and click Next to restore your system to the selected point.

After the System Restore is initiated, it should take about 30 minutes for the process to complete. If the restore is successful, issues that are caused due to Windows updates, driver updates, new software installation etc. will be resolved and your computer should behave normally. However, if you decided to perform a System Restore due to virus attacks, please note that it cannot undo virus attacks or related errors. In that case, you need to perform a detailed anti-virus scan to treat the virus.

Lost files after a system restore?

Usually, personal files are not affected after a system restore. However, it is still better to be prepared by having a backup of your system just in case. In the event that you don’t have a backup and you lose some files after system restore, recovery is possible with the help of Hi5 data recovery software.

Using this tool, you can recover all types of files like photos, videos, PDF’s, Word files, Excel files, and various others. You can even download a trial version of the tool for free if you want to see the files it can recover and quality of recovered files. The advantage of this tool is that it can also be used in multiple other scenarios like recovering files after a factory reset, after formatting a drive or after partitioning a drive.

We all know that deleted files usually end up in the Recycle Bin. One click on the ‘Restore’ button can recover all your files back to the original place. But in some cases, this might not be the case and deleted files may be deleted permanently and may not show up in the recycle bin at all. Let’s discuss this issue more in detail and also find out how to avoid this scenario.

What happens to deleted files?

Generally, when files are deleted from the user interface, they end up in the $Recycle.bin folder. For convenience, this folder is provided as a shortcut on the desktop. So, in case you need to recover deleted files, all you need to do is go to this folder and right click on the file you need. Then click ‘Restore’ to restore your files.

However, in some cases, you may not find deleted files in the Recycle bin. This usually happens when the size of the file exceeds a certain limit or if you have pressed the Shift key along with Delete and in a few other cases, which we will see in this blog post.

In these scenarios, although you don’t find the files in the Recycle Bin, it is not that they are nowhere on the computer. They are still present somewhere on your hard drive, but with a deleted tag on it, hence it will not be visible on the user interface. But don’t worry, these files can also be recovered using the right tools, which will also be covered in this article.

Precautions to avoid deleting files permanently

1. Make sure you are not using the ‘Shift’ key

While deleting a file, using the Shift key along with Delete will permanently delete the file. In this case, the deleted file will bypass the Recycle bin, hence you won’t find it there. To avoid this possibility, always make sure you are not using the ‘Shift’ key while deleting a file.

2. Check if you are deleting files from USB flash drive

Unlike your internal hard drives, USB flash drives don’t have the Recycle Bin. So, files deleted from the USB will have their files deleted permanently. If you’re wondering why your files are getting deleted permanently, well, it is probably because you are deleting files from the USB stick.

Hence, it is advisable that you make a backup before deleting files from your USB flash drive.

3. Check if the files you are deleting is too large

For a deleted file to be stored in the recycle bin, it should be within the size limit of the Recycle Bin. If this is not the case, the file will be permanently deleted.

If you always work with large files and you wish that these files be stored in the Recycle Bin when deleted, it is possible to customize the size of allowance in the Recycle Bin. To change these settings:

• Right click on the Recycle Bin folder and click Properties

• Click on the Customize Size option and change the settings as required

• Confirm that ‘Don’t move files to the Recycle Bin’ is not selected

If in the Recycle Bin properties, the option ‘Don’t move files to the recycle bin’ is selected, then Recycle Bin won’t save deleted files. In that case, you will obviously not find deleted files in the Recycle Bin.

To avoid this as a possibility, just uncheck the option ‘Don’t move files to the Recycle Bin’.

• Right click on the Recycle Bin folder on your desktop and select Properties
• Uncheck ‘Don’t move files to the recycle bin’ and click Apply

These tips should help you avoid the problem of deleted files bypassing the Recycle Bin and getting deleted permanently. But in case, you are looking to recover files that have bypassed the Recycle Bin, we have a solution for that as well as explained in the next solution.

Solution 5: Use Hi5 Software

Hi5 Software is the best in class data recovery software to recover files that are deleted permanently or ones that have bypassed the Recycle Bin. It makes use of the principle that deleted files are never permanently deleted but stored somewhere on the hard drive. In order to find these files, the software performs a detailed scan of the hard drive and restores them.

Hi5 Software can be used even to recover files emptied from the Recycle Bin. Hi5 Software is a versatile software that can be used in a myriad of different data loss situations including accidental deletion, loss of data during copy-paste operations, deletion of files from the command prompt, etc.

In this article, let us discuss the error ‘Can’t find the specified file’ and possible solutions to resolve the same. First, let us first understand when does this error occur? This error normally occurs when you try to rename a folder or you try to copy the folder to another location.

This error can be particularly annoying because you will not be able to access the contents of the folder you are trying to rename or copy. In order to solve this problem, first, make sure you are logged in to the correct account. Sometimes the account you are logged in to may not contain the file/folder you are looking for. Else, you can also login to the admin account to avoid this problem entirely.

Then check if the error still persists and if it does, please proceed to the solutions below.

Solution 1: Search for the file/folder

This solution works only if the file/folder is moved to a different location on your hard drive. It won’t work if the file is lost or missing. To search for the file, follow the steps below.

1. Right click on the Start button and click Search
2. In the Search bar, type the ‘name’ of the file/folder you are trying to find
3. If you find any file with the same name, open the folder and copy the contents to its original location

Again, like said before, this method works only if the file/folder is misplaced. However, if this doesn’t work, please proceed to the next step.

Solution 2: Remove the following registry keys

Note: Please be careful with this step as even the slightest error can cause severe damage to your computer and may require OS reinstallation.

Go to the path:

HKLM\Software\Microsoft\CurrentVersion\Explorer\FolderDescriptions\

Then remove the following 5 registry keys:

{2112AB0A-C86A-4ffe-A368-0DE96E47012E}

{491E992F-5643-4af4-A7EB-4E7A138D8174}

{7b0db17d-9cd2-4a93-9733-46cc89022e7c}

{A302545D-DEFF-464b-ABE8-61C8648D939B}

{A990AE9F-A03B-4e80-94BC-9912D75041104}

Solution 3: Restore missing/lost files and perform System Restore

If the above solutions don’t help you resolve the ‘Can’t find the specified file error’, you can restore missing files using data recovery software like Hi5 file recovery software and then perform a system restore.

To recover missing or lost files, Hi5 file recovery software is a wonderful choice. It is designed to recover all types of files like Word and Excel documents, PDF’s, PPT’s, notes etc. It can be used to recover permanently deleted files or lost files from your computer and other external storage devices like pen drives, external hard drives etc.

Using Hi5 file recovery software is as simple as it can get. All you need to do is click on Recover files and then on Recover Lost files. Then select a drive to recover files from and the software takes care of recovering files for you. It’s that simple!

Once you have your files recovered, go ahead and perform a system restore. This will undo you major changes you made recently that may be causing the error. To perform a system restore, follow the steps below.

1. Click on Windows + X and select Control Panel
2. Click on System & Security > System
3. Click on System Protection
4. In the System Properties window, click on System Restore button

Then choose a restore point that you want to get back to and wait till the system restore process is complete. This should help you resolve the error ‘Can’t find the specified file’ error.

USB flash drives are one of the most useful and compact data storage devices. The low prices at which they are now available has made them all the more attractive and useful.

Like all hardware devices, USB devices also experience issues occasionally due to which you may lose data. In this article, we discuss one such error called ‘Error code 43’. It is one of the most common types of Device Manager error codes. This error 43 can be pretty confusing as it can either indicate a problem as simple as a corrupted driver or something as complex as a failed USB.

Hence, in order to resolve this error easily, we’ve compiled a list of troubleshooting steps starting from the simplest. So, let’s jump right in.

Solutions to resolve error code 43 on USB drives

Solution 1: Restart your computer

This may sound extremely basic, but restarting your systems is found to resolve many issues including error code 43. So try restarting your system and check if the error is resolved. If not, proceed to the next step.

Solution 2: Install Windows service packs

If you don’t have Windows updates installed, please update using the latest Windows updates available for your version of Windows.

Solution 3: Restore to an earlier point

A recent update or any related software change may have caused the error 43 on your USB drive. In order to undo this change, you can restore to an earlier point using the System Restore feature. To do so, please follow the steps below.

1. Open Control Panel and click on System & Security in Control Panel
2. Click on System > System Protection link
3. Then click on the System Restore button and hit Next
4. Choose a restore point to undo any changes you think caused the error to occur

Solution 4: Update/Reinstall the drivers

Out-dated drivers can cause a variety of issues including the error 43 on USB drives. This issue can be resolved by updating the drivers as explained below.

1. Click on Windows + X and open Device Manager
2. Expand the section and identify your device
3. Once you have found your device, right click on it and select Update Drivers
4. Then click on Search Automatically for driver software

If for some reason, you are unable to update the drivers, you can also reinstall them by right-clicking on the device and selecting Uninstall. Then restart your computer for the system to automatically reinstall drivers for you.

Solution 5: Recover data and replace the USB

If none of these methods help you resolve the ‘error 43’, there may be a problem with your USB hardware itself. In which case, you can replace the hardware. But before you do that, it is advisable to recover data from the drive using Hi5 Software. Using this tool, you can recover data from inaccessible or corrupt USB’s. Even if the USB is producing errors such as error 43 or similar, data can be recovered using this tool.

Not just USB’s, but data can be recovered from other storage devices like external hard drives, SD cards etc. Just use the partition recovery option in the tool and have all your data recovered in minutes.

If files are deleted or lost accidentally from your USB’s, Hi5 also provides a USB file recovery version to help recover these files. Both the hard drive version as well as file recovery version is available for free! Download a trial and recover your data!

This article discusses a Windows error ‘error 15: File not found’. Normally, when this error occurs, you may have difficulty to boot into your system. This error usually occurs due to bad sectors on the hard drive, file system corruption, due to MBR corruption or when important system files are deleted.

Now let us see some troubleshooting steps to resolve the ‘error 15: file not found’ issue. But before we proceed, it is advisable to recover data from the hard drive displaying the error 15 as some of the solutions may cause data loss.

Solution 1: Perform startup repair

Startup repair is known to repair many startup issues including error 15. Let’s go ahead and follow the steps below to repair your system using startup repair.

1. Restart your computer and press the F8 key before the Windows logo appears
2. Click on Advanced Options > Troubleshoot
3. Once again, click Advanced Options and select Startup Repair

Now wait for the computer to perform its repair process and once it’s complete, restart your computer. If the error is resolved, startup repair has repaired the issue for you. If not, proceed to the next troubleshooting step.

Solution 2: Run SFC

SFC stands for System File Checker which is used to scan and repair corrupt system files. SFC is also known to repair error 15, so let’s jump right into the steps involved in this process.

1. Restart your computer and before the Windows logo appears, press the F8 key
2. Click Advanced Options > Troubleshoot
3. Then select Advanced Options and select Command Prompt (Admin)
4. In the command prompt, type ‘SFC /SCANNOW’ and hit Enter

Wait for SFC to complete the scanning process and repair corrupt or damaged system files. If the errors are fixed, you will get a success message, else SFC will ask to run the scan in safe mode as explained in the next step.

Solution 3: Run Safe Mode

If you are able to start Windows and login without any issues, the easiest way to enter Safe Mode is by pressing the Shift key when the system restarts. If this doesn’t work, go to the Advanced Options menu as explained in Solution 1 and 2 and then follow the steps below.

1. Click on Startup Settings
2. Then choose Enable Safe Mode
3. If you’re not able to boot into Safe Mode, please go to the next section. If you are able to boot into Safe Mode, follow the next step.
4. Press the Windows key and type ‘cmd’ in the Search bar
5. Open Command Prompt (Admin) and type ‘SFC /SCANNOW’

Once the scan completes, try restarting your computer and see if the error is resolved. Else, you may need a complete reinstallation of Windows if none of the above solutions help you resolve the error.

Data recovery using Hi5 Software

If you find that data is inaccessible due to error 15 or if you are not able to boot into your system at all, then it is recommended that you recover data using Hi5 Software. It is a wonderful choice to recover data from inaccessible or non-booting drives. In addition, it can also be used to recover data from formatted drives or after an OS reinstall.

In some other cases when your hard drive has issues, you may be prompted to format the drive to use it. Hi5 Software can be used even in these cases to recover data without formatting the drive. The software supports all kinds of hard drives and storage devices like USB flash sticks, external hard drive etc. Download a free trial and check out this powerful hard drive recovery software today.

Normally, files deleted from your Mac systems get stored in the Trash, from where it can easily be accessed and restored if necessary. However, in some cases, you may find that the trashed files get deleted immediately allowing no scope for you to access the file from Trash.

This issue usually occurs due to lack of reading/write permissions or if your account’s Trash has been deleted. Or it can also happen if you are no longer the owner of the account’s Trash folder. In order to solve this problem and allow you to add files to your Trash, we provide some helpful solutions in this article. Please follow along.

Solution 1: Make sure you have read/write permissions

Having appropriate read/write permissions for your account’s Trash folder is necessary to be able to add files to Trash. So first let’s check if you have that feature enabled.

• Open Finder and click on Command + Shift + H keys
• In the contents of the home folder that opens, press the Command + I keys to open the Info window
• Select the Info window and open the Sharing & Permissions panel
• If your account is not listed under ‘Name’ or you do not have Privilege for ‘Read and Write’, please set yourself these permissions
• Then log back in and check if the issue is resolved. If not, please proceed to the next step.

Solution 2: Verify that your Trash folder actually exists

You will have trouble adding files to your Trash if your Trash folder is deleted. Yes it can happen; trash folders can get deleted due to various reasons. To see if that’s the problem, let’s check using the following steps.

1. Open the Applications folder and select Utilities folder
2. Then open Terminal and type the following command

‘ls ~/.Trash’

3. Hit Return and if you see a message ‘No such file or directory’, restart your system
4. Then log in again and see if you are able to delete files and see them in your Trash
5. If not, you will have to create a new Trash folder as explained in the next step

Solution 3: Create a new Trash folder

This solution involves emptying the contents of your old Trash and creating a new one with the right ownership and permissions. To do this, follow the steps below

• Click on the Applications folder and select Utilities
• Then click on Terminal to open it
• In the command prompt, type the respective commands for the accounts you have

For admin accounts: ‘sudo rm –ri  ~/.Trash’ and hit Return

User account: ‘sudo rm –ri /Users/your_user_name/.Trash’ and hit Return (Please replace your_user_name with the actual username)

• Enter the admin password if it’s the admin account
• You will be prompted to remove each file in the Trash folder and also the Trash folder. Click Yes and hit Return for each prompt that you receive
• Now, log out of your account and log in again

You should now be able to delete files and see them as they appear in your new Trash folder. We hope one of these solutions help you resolve the error.

However, in cases when you have experienced deletion of important files and they don’t appear in your Trash, you may want to make use of data recovery tools. Hi5 Software’s file recovery tool is a great choice to recover files that are deleted permanently or files deleted from Trash. It has the ability to recover all kinds of files like Word documents, Excel files, notes etc. It works with all versions of Mac OS including High Sierra. Download a trial and try for free today!

Windows updates although immensely helpful are generally known to cause certain problems. But wouldn’t it be better if you could take some precautions before the update and avoid potential issues? In this article, we are going to teach you exactly what precautions you can take to prevent your system from crashing or producing other problems after an update is installed.

1. Check if you have enough space on your hard drive

First of all, check if you have at least 20% of free space on your hard drive. This is absolutely required for all Windows updates and programs that come with it. Once you have that confirmed, proceed to the next tip.

2. Choose when you want to install updates

Another tip is for you to change the Windows updates settings to ‘Let me choose when to install’. To do this, follow the steps below

• Open Control Panel > System and Security
• Select Windows Update
• In the left menu, select Change Settings
• Below Important Updates, select Download updates but let me choose when to install them
• Finally, click Ok and save

By downloading updates, you are making sure you are not missing out on any updates but you have complete control over when to install them. Later on, go through the updates and install them one at a time.

3. Plug in your PC

Make sure your computer is plugged into a power supply. This will prevent many problems that may occur if your computer turns OFF during an update.

4. Create a restore point

This is like being prepared with a restore point should you encounter any problems after an update. If you encounter any problems, all you have to do is roll back to that restore point and it’s going to be like undoing the update and going back in time.

To create a restore point, follow the steps below.

• Go to Control Panel > System and Security
• Click System Protection in the left menu
• In the dialogue box that appears, click on the System Properties tab and select Create
• Assign a name to the restore point and click on Create

5. Have a backup

We have the most important precaution listed here. Always be prepared with a backup. Whether you back up on an external hard drive or make an online backup, it doesn’t matter, but please make a backup of all files on your system. This is a lifesaver should something really nasty happen after an update and you are forced to reset your PC or reinstall your OS.

We hope that these measures will prevent a crash as a best-case scenario or in other cases, will help you be prepared in the event of a crash. However, if you have already experienced a crash post a Windows update and looking for solutions, Hi5 Software is designed to help you recover files after a crash. With this software, all your data can be recovered safely without any changes to the original.

The software is designed for not only recovering files after a crash but also after a factory reset or after an OS reinstall. Whatever may be the case for data loss, it can be easily recovered. Download a trial and try it for free!